Click image to view full size image
48V50Ah UPS repalcement storage battery used for telecom base station,backup power supply
Specification :
| Model | Standard voltage | Standard capacity | mm Dimension | kg Weigh | Remark |
| SDDX-4850 | 48V | 50Ah | 440*400*133 | 35±1 | 3U Cubical |
| configuration | cell 3.2V50Ah ,16S single battery in series | ||||
| Working temperature | -2060 | ||||
| Storage temperature | -1065 | ||||
| Relative humidity | ≤90(40±2) | ||||
| Altitude | 05000 m | ||||
| Charge mode | Intelligent interrupt charge | ||||
| Average total voltage | 56.80V | ||||
| Cell Average voltage | 3.55V | ||||
| Float total voltage | 54.40V | ||||
| Cell float voltage | 3.40V | ||||
| Charge current | 55.0A | ||||
| Cell overvoltage alarm | 3.65V | ||||
| Cell overvoltage alarm recover | 3.60V | ||||
| Cell overvoltage protection | 3.80V | ||||
| Cell overvoltage protection | 3.60V | ||||
| Total voltage overvoltage alarm | 58.0V | ||||
| Total voltage overvoltage alarm | 54.0V | ||||
| Total voltage overvoltage protection | 59.0V | ||||
| Total voltage overvoltage protection | 54.0V | ||||
Description:
This product are based on the telecom operator are suitable for the latest back-up power supply under the new communication trend for development ,with integration , miniaturization, Light-duty Intelligentize , standardization ,Green Environmental Protection etc
The LiFePO4 battery pack with IBS models system and consist of 16S single 3.2V50AH cell and BMS system place to 19 inch 3U standard rack crate.
Multiple modules can be connected in parallel to increase the output power and capacity ,can set the each back up power address via address switch , then by connect with RS485 interface to cascade communication .this system operate environment temperature is around -2060,the volume is small and light-weight ,easy to install and maintenance .
Applications:
1.widely used in Indoor Distributor System , Integr
48V 50Ah UPS Replacement Batteries for Telecom Base Station / Back Up Power Supply Battery
